Wood Colour Indoor Wood Stain
Littlefair's Wood Finishing Products
SKU: ASP-15ML-FBA
Indoor Use - Water Based - Eco-friendly - Non-Toxic
Quick Drying - Low Odour - Lightfast - Easy Brush Clean
| Drying Time |
Touch dry in approximately 2 hours. Please note: this is an approximate drying time. There could be a number of factors that may affect this. |
| Coverage |
Approx. coverage of 10-12m² per litre, for one liberal coat. |
Littlefair's Water Based Wood Dyes are lovingly bottled by hand in the North West of England using the unique colour formulae created by Mr. Littlefair himself.
We bring you a unique formula that penetrates the wood to produce a beautiful aged appearance on timber such as furniture, doors, skirting boards, architraves & mouldings.
If you wish to apply one of our dyes to your floor, please take a look at our Water Based Interior Floor Dye.
Our Antique Stripped Pine will create an authentic 'old stripped pine' effect, Dark Pine will create a warm and mellow colour, Golden Pine, Light Oak & Light Rosewood will create a warm, more modern shade, whilst Black Ebony, Brown Mahogany, Dark Red Mahogany, Very Red Mahogany, Dark Walnut, English Oak, French Oak, Golden Oak & Medium Oak will create an authentic hardwood colour.
Littlefair's Water Based Wood Dye produces a more natural 'positive' grain effect. Most other wood stains are more easily absorbed into the softer areas of the wood between the darker details of the natural grain. This results in a 'negative' stain effect as it causes the softer area to go darker which in turn leads the actual grain appearing lighter. Littlefair's Water Based Wood Dye enhances the darker details of the natural wood grain and produces the desired natural finish.
|
Colour Reproduction
We endeavour to reproduce our colours and finishes as accurately as possible - both online and in print. However there are a range of factors to consider when comparing our samples to your chosen project: the type and condition of the surface itself may produce a slightly different appearance of the finished colour. Please bear in mind the shape, size and lighting conditions. |
|
Please note: Our Water Based Wood Dyes have a matt appearance when dry and come to life when finished with Littlefair’s Wood Finishing Products. We recommend finishing your project to provide the dyed wood with extra protection. We do not recommend finishing Black Ebony with matt varnish as this can create a cloudy appearance. |
Interior Wood Dyes are for indoor use only. If you require an exterior version of these wood dyes, please click here.
Customer Reviews
4.9 Based on 259 Reviews
Customer Photos
- Reviews
- Questions
Filter Reviews:
DD
02/04/2025
David D.
United Kingdom
Lovely finish
Bought the English Oak for a toolbox refurbishment I am undertaking. I've used it extensively yet but did trial it on a few of the drawers. So far the finish looks perfect and is very easy to apply. very pleased.
CW
23/03/2025
Carrie W.
United Kingdom
Happy repeat customer
I love these wood stains and use them for a lot of my small projects. I find it really good for making new 'shiny pine' look old. The stain gets into all the little dings (I like to make some dings if there aren't any!) to give an 'antiqued' look to the wood. And you can get different effects using the same colour of stain by finishing with wax. I use chalk paint wax because I had some in the drawer the first time I used it, and I find it works well on this stain too. I always use a layer of clear wax to seal it, then afterwards I sometimes buff in either some white or dark wax on top, depending on the look I'm going for. It works beautifully! And the stain goes quite a long way. I'm sure I'll be back for more once this bottle runs out!
A range of Interior Water Based Wood Dyes suitable for hand, spray or dip application
Littlefair's Top Tip
To help create a fine finish you could raise the grain before the final sanding. Start by dampening the wood with a thin film of water. Once dry, a final sanding will restore the flatness ready for applying the dye.
Preparation
Careful, thorough preparation will result in a far superior finish.
Ensure your wood is as clean as possible and free from previous finishes. Do not apply the dye to wet surfaces. Well sanded wood will be far more receptive to dye, and this will form the basis for a good quality finish. Avoid cleaning the wood with white spirit!
Upturn and shake well for a few moments prior to use, ensuring any sediment is well mixed and the colour of the liquid is consistent throughout the entire bottle. Repeat prior to each use of the dye.
Application
Apply the dye liberally along the grain with a good quality brush, alternatively the dye can be sprayed.
Please note that each dye may require a different number of coats depending on the shade you desire. Further coats will deepen the shade if required.
We recommend using protective gloves and splash goggles during use and simply wash out your brush with cold water afterwards.
Completion
Once dry, the dyed wood can be finished with a variety of finishing products depending on the desired result.
Our Extra Strong Varnishes or Superior Worktop and Danish Oils will provide greater protection. Once the varnish or oil is completely dry, you can apply wax polish to create a durable yet softer, silky feel. Our Extra Strong Varnishes are quick drying and non-yellowing - ideal for producing a tough furniture finish on most wooden items.
The oils will be more suitable in damp conditions however to achieve a tough waterproof coating, Littlefair’s Titan Topcoat can be used for superior robust protection.
It’s important to note that the final appearance will be a combination of the natural colour of your wood, the effect of the dye and the finishing product if used. With this in mind - always produce a test piece so you can properly judge the result.
You may also like